Description

Imagine you have a special kind of cable that can carry both electricity and data, like a super highway with two lanes. This is a PoE (Power over Ethernet) cable. Devices like security cameras need electricity to work, but running a separate power cable can be messy.

The Genata 2-1-2 PoE Divider is like a little traffic controller for this special cable. It takes the electricity lane (power) and splits it off from the data lane. It’s like separating the cars that need to stop for gas (camera needing power) from the ones going straight (data).

Here’s what the divider does:

1. Power Grabber: It grabs the electricity from the PoE cable.
2. Splitter: It separates the electricity from the data.
3. Power Delivery: It sends the electricity to your camera through a regular power cable.
4. Data Goes On: The data keeps traveling on the PoE cable like normal.

This is helpful because:

• You only need one cable (the PoE cable) for both power and data. Less cable clutter!
• It’s neat and tidy, especially if you have many cameras.
• Safer for some places where separate power cables might not be ideal.

GNT-5313AB Genata PoE Splitter

GNT-5313AB Genata PoE Splitter is an economical and practical, high-performance, and high-reliability PoE remote power receiving device based on the IEEE 802.3af standard, which can separate power and data signals transmitted through network cables. It’s a PoE Synthesizer separator Converter cable connector for CCTV systems.

Consider it a power supply equipment that complies with the IEEE 802.3af standard configured to provide data and power for network equipment that does not support PoE.

GNT-5313AB Genata PoE Splitter; PoE Synthesizer separator Converter is widely used in WiFi Access Points, IP CCTV Cameras, security, video & network cameras. It’s a network cabling connector that is suitable for wireless LAN (WLAN) network monitoring.

Easy to install and use, you can quickly connect the cable with the supplied wiring harness. Made of high-quality abs material, sturdy and durable. It allows you to save on wiring costs and is suitable for network monitoring systems, network-integrated wiring.

PoE Splitter splits a PoE signal into a 12VDC power and 10/100Mbps ethernet data source.

Moreover, this device allows you to run ethernet cables from a POE Switch over long distances. It then splits the PoE signal into a separate data signal and 12Vdc power sources in order to run a non-PoE devices. In addition, you’d also find it has short-circuit protection, over-temperature protection that helps in preventing the device from a surge.

Think of it like a special adapter that makes using cool gadgets like security cameras even easier!